Turn On The Printer; Install Ink Cartridges - Epson Stylus Photo R2400 Start Here Manual

Epson stylus photo r2400: quick start

Hide thumbs Also See for Stylus Photo R2400:

Turn On the Printer

Plug the printer's power cord into an electrical outlet.

NOTE: Do not connect the printer to your computer yet. Wait until you are instructed

to connect the USB cable in section 5, "Install Software."

Press the

Power button to turn on the printer.

CAUTION: Never use an external switch, such as a wall switch or power strip switch,

to turn the printer on or off.

There are 8 cartridge slots in the printer, but 9 ink cartridges are included. One slot can use

either the Photo Black cartridge or the Matte Black cartridge. Install the Photo Black cartridge

for professional quality glossy printing and for printing on a wide range of media. Install the

Matte Black cartridge for professional quality matte printing. For details, see your User's Guide.

Open the printer cover.

Shake the ink cartridge packages 4 or 5 times before

opening them. (Don't shake them after they're unpacked.)

Unwrap the ink cartridges.

Don't touch the green circuit

board or remove any labels

Open the cartridge cover and remove the insert.

Lower each cartridge into its holder with the green

circuit board facing the front. The color of the

cartridge label should match the marker above

the cartridge holder.

Then gently push each ink cartridge down until it

clicks into place.

Table of Contents