Table of Contents
Advertisement
D
SD MOUNT indicator
When an SD memory card is inserted and could
be recognized
When data can be saved after the SD memory card is
inserted and the SD ON/OFF button is pressed
(less than 1 second)
When data can be saved to the SD memory card
When the SD memory card is removed after holding down
the SD ON/OFF button (about 2 seconds)
When data cannot be saved to the SD memory card
because an abnormality was detected or the SD
memory card is configured not to be used
E
SD ERROR/AF indicator
When AF (Auto Focus) operation is being executed
When the set is being started
When an SD memory card is recognized normally
When the SD slot is not used or an abnormality is
detected in SD card after the camera has started
Note:
Lighting/blinking LED can be turned off with the software settings at any time. (The initial state is
lighting or blinking.) Set the LED to be solid off if necessary, depending on the installation condi-
tions. (☞ Operating Instructions on the Panasonic support web site)
F
SD ON/OFF button
⑴ When the SD ON/OFF button is pressed (less than 1 second), the SD MOUNT indicator lights
up in green and data can be saved to the SD memory card.
⑵ When the SD ON/OFF button is held down (about 2 seconds), the SD MOUNT indicator lights
off and the SD memory card can be removed.
G
AF button
Used when adjusting the focus. Refer to the Installation Guide for details.
H
TELE button
Click the TELE button to adjust the zoom ratio to the "Tele" side.
I
WIDE button
Click the WIDE button to adjust the zoom ratio to the "Wide" side.
Lights off → Blinks green →
Lights off
Lights off → Lights green
Lights green
Lights green → Blinks green →
Lights off (recording)
Lights green → Lights off
(waiting for recording)
Lights off
Blinks red (Interval of 1 time/ second)
Lights red
Lights red → Lights off
Lights red → Stays red
21
Advertisement
Table of Contents
