Printing Out Network Setting Information - Canon Pixma MX520 Series Online Manual

Printing Out Network Setting Information

You can print out the network settings of the machine such as its IP address and SSID.
Important
This print out contains valuable information about your computer. Handle it with care.
1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Load a sheet of A4 or Letter-sized plain paper.
Loading Paper
3. Press the MENU button.
The menu screen is displayed.
4. Select Setup, then use the OK button to confirm the selection.
5. Select Device settings, then use the OK button to confirm the selection.
6. Use the button to select LAN settings, then use the OK button to confirm the selection.
7. Use the button to select Confirm LAN settings, then use the OK button to confirm the
selection.
8. Use the button to select Print LAN details, then use the OK button to confirm the selection.
9. Use the button to select Yes, then use the OK button to start printing.
The machine starts printing the network setting information.
The following information on the machine's network setting is printed out.
Item
Wireless LAN
Connection
MAC Address
SSID
Communication Mode
Channel
Encryption
WEP Key Length
Authentication
Signal Strength
TCP/IP Version
IPv4 IP Address
IPv4 Default Gateway
Subnet Mask
IPv6 IP Address *1
IPv6 Default Gateway *1 Default Gateway (IPv6)
Explanations of the item
Wireless LAN
Status of the Wireless LAN
MAC Address
SSID
Communication Mode
Channel
Method of the Encryption
WEP Key Length
Method of the Authentication
Signal Strength
TCP/IP Version
Selected IP Address (IPv4)
Default Gateway (IPv4)
Subnet Mask
Selected IP Address (IPv6)
Enable/Disable
Active/Inactive
XX:XX:XX:XX:XX:XX
SSID of the wireless LAN
Infrastructure
XX (1 to 13)
none/WEP/TKIP/AES
Inactive/128/64
none/auto/open/shared/WPA-PSK/WPA2-PSK
0 to 100 [%]
IPv4 & IPv6/IPv4
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
147
Setting