Checking The Ink Status With The Lcd On The Machine - Canon Pixma MX520 Series Online Manual

Checking the Ink Status with the LCD on the Machine

Note
The ink level detector is mounted on the machine to detect the remaining ink level. The machine considers as ink is
full when a new FINE cartridge is installed, and then starts to detect a remaining ink level. If you install a used FINE
cartridge, the indicated ink level of it may not be correct. In such case, refer to the ink level information only as a
guide.
When remaining ink cautions or errors occur, the message will appear to inform you of the error. Take appropriate
action according to the message.
A Message Is Displayed
1. Make sure that the power is turned on, and press the MENU button.
2. Select Setup, then press the OK button.
LCD and Operation Panel
The setup menu screen will appear.
3. Select Estimated ink levels, then press the OK button.
A symbol appears in the area
Example:
The ink is running low. Prepare a new ink cartridge.
Note
To access other available functions, use the mode buttons or the MENU button.
To display and print the model number of the FINE cartridge, select Ink number by pressing the right Function
button.
You can also check the ink status on a screen of the LCD displayed while printing.
You can also check the ink status on the computer screen.
Checking the Ink Status from Your Computer
(A) if there is any information about the remaining ink level.
78