Fueling - Stihl MS 261 C-M Instruction Manual

English

Fueling

Preparing the machine
Before fueling, clean the cap and
N
the area around it to ensure that no
dirt falls into the fuel tank
Always position the machine so that
N
the cap is facing upwards
Opening
Raise the grip until it is upright.
N
18
Turn the cap counterclockwise
N
(about a quarter turn).
Marks on tank cap and fuel tank must
line up.
Remove the cap.
N
Filling up with fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
STIHL recommends you use the STIHL
filler nozzle for fuel (special accessory).
Fill up with fuel.
N
Closing
Grip must be vertical:
Fit the cap – marks on tank cap and
N
fuel tank must line up.
Press the cap down as far as stop.
N
While holding the cap depressed,
N
turn it clockwise until it engages in
position.
The marks on the tank cap and fuel tank
are then in alignment.
MS 261 C-M