Table of Contents
Advertisement
English
Fueling
Preparing the machine
Before fueling, clean the cap and
N
the area around it to ensure that no
dirt falls into the fuel tank
Always position the machine so that
N
the cap is facing upwards
Tank cap markings
Tank caps and fuel tanks may be
marked in different ways
Depending on the version, your machine
may be equipped with a tank cap and
fuel tank with or without symbols.
24
Left:
Tank cap without symbols
Right:
Tank cap with markings and
symbols on cap and tank
Tank cap without symbols
Opening
Swing the grip to the upright
N
position.
Rotate the tank cap about a quarter
N
turn counterclockwise.
MS 171, MS 171 C, MS 181, MS 181 C, MS 211, MS 211 C
Remove the cap.
N
Filling up with fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
STIHL recommends you use the STIHL
filler nozzle for fuel (special accessory).
Fill up with fuel.
N
Closing
Grip must be vertical:
Fit the cap – positioning marks on
N
tank cap and filler neck must be in
alignment.
Press the cap down as far as stop.
N
Advertisement
Table of Contents
