Lexmark CX417de User Manual page 252

Troubleshooting
Memory full [38]
Try one or more of the following:
•
From the printer control panel, select Cancel job to clear the message. For non‑touch‑screen printer
models, press
•
Install additional printer memory.
Memory full, cannot print faxes
From the control panel, do either of the following:
•
Touch Continue holding faxes without printing to clear the message.
•
Touch Attempt to print to restart the printer and continue printing.
Network [x] software error [54]
Try one or more of the following:
•
From the printer control panel, select Continue to continue printing. For non‑touch‑screen printer
models, press
•
Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
•
Update the network firmware in the printer or print server. For more information, visit the Lexmark
support Web site at http://support.lexmark.com.
Non-Lexmark [supply type], see User's Guide [33.xy]
Note: The supply type can be a toner cartridge or the imaging kit.
The printer has detected a non‑Lexmark supply or part installed in the printer.
Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-
party supplies or parts may affect the performance, reliability, or life of the printer and its imaging
components. For more information, see
All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable
results if third-party supplies or parts are used. Imaging component usage beyond the intended life may
damage your Lexmark printer or its associated components.
Warning—Potential Damage: Use of third-party supplies or parts can affect warranty coverage.
Damage caused by the use of third-party supplies or parts may not be covered by the warranty.
To accept any and all of these risks, and to proceed with the use of non-genuine supplies or parts in your
printer, press and hold
If you do not want to accept these risks, then remove the third-party supply or part from your printer and
install a genuine Lexmark supply or part.
Note: For the list of supported supplies, see the "Ordering supplies" section or go to
www.lexmark.com.
to confirm.
to confirm.
"Using genuine Lexmark parts and supplies" on page
and the # button on the control panel simultaneously for 15 seconds.
252
207.