Epson Stylus Color 680 Setup Manual page 6

2. Turn on your computer and start Windows. If the New Hardware
Found dialog box or any other Wizard appears, click Cancel.
3. Insert the printer software CD shipped with your printer in the CD-
ROM drive. The Installer dialog box appears. (For floppy disk users,
insert the disk in the floppy-disk drive and double-click the
My Computer icon, the floppy disk drive icon, and then Setup.exe.)
4. Select Install Printer Driver/Utility, and
click . Then, click OK in the dialog box
that appears to start the printer software
installation. After the printer software
installation is complete, the Problem
Solver is automatically installed on your
hard drive.
Note:
It is possible to install the Reference Guide
on your hard drive from the Installer
dialog box, as shown above. To install the
guide, click Online Guide and then
Guide and follow the on-screen instructions. When the installation is
complete, an ESC680 Guide icon appears in the EPSON folder. Double-
click the icon to open the guide.
The Problem Solver provides tips and instructions to help you solve most
problems that you may encounter when printing. The Problem Solver can
be accessed through the Epson folder, Status Monitor 3, or the printer
driver. For details, see the "Troubleshooting" section of your Daily Use
guide.
5. Follow the on-screen instructions to turn on your printer.
For Windows 98 users, the printer port configuration starts
automatically.
For printers connected via the USB cable, the USB device driver
installation starts automatically at this point. When a message appears
asking you to restart your computer, do so.
6. After turning on the printer, the Setup
utility opens automatically.
Follow the on-screen instructions to install
the ink cartridges, check the print head
nozzles, and clean the print head. When a
message appears informing you that the
setup is complete, click OK.
. Then, click Install Reference