Epson Stylus Color 680 Setup Manual page 7

Note:
If the Setup utility does not start, proceed to step
using the printer's control panel.
7. When a message appears informing you that the installation is
complete, click OK.
Note:
If an error message appears, either the printer driver or the EPSON USB
printer device driver is not installed correctly. See "Troubleshooting" in the
Daily Use guide for details.
After the setup is complete, proceed to step
Ensuring that the USB driver is installed correctly for Windows 98 and
Windows 2000 users
Follow the directions below to confirm that the USB driver is installed
correctly.
Note:
The illustrations used in this section show the procedure for Windows 98.
1. Click the Start button, point to Settings, and click Printers. Make sure
that the icon for your printer appears in the Printers window.
Select the icon for your printer, then click
Properties on the File menu.
2. For Windows 98 users, click the Details
tab and make sure that EPUSBx: (EPSON
Stylus COLOR 680) is displayed in the
Print to the following port list box. For
Windows 2000 users, click the Ports tab
and make sure that USBxxx, EPSON Stylus
COLOR 680 is displayed in the Print to the
following port(s) list box.
Note:
If the correct port is not displayed, refer to the
"Troubleshooting" section of the Daily Use
guide or the online Reference Guide.
to install the ink cartridges
to print your first page.