Epson Stylus Color 680 Setup Manual page 9

Note:
It is possible to install the Reference Guide on your hard drive from the
printer software CD-ROM. To install the guide, click Install Reference
Guide and follow the on-screen instructions. When the installation is
complete, a View Reference Guide icon appears in the EPSON folder.
Double-click the icon to open the guide.
It is possible to access Technical Support from the printer software
CD-ROM. Insert the CD in the CD-ROM drive and double-click the
Technical Support Web Site icon in the EPSON folder.
3. At the initial screen, click
Continue. The Installer dialog box
appears.
4. To install the printer software that
is included on your printer software
CD-ROM, make sure that the Install
Location box displays the correct
drive, then click Install.
5. When a message appears informing you that the installation is
complete, click Restart to restart your computer.
Selecting your printer in the Chooser
After you have installed the printer software on your Macintosh, you need
to open the Chooser and select your printer. You must select a printer the
first time you use it or whenever you want to switch to another printer. Your
Macintosh will always print using the last printer selected. Follow the steps
below to select your printer in the Chooser.
1. Choose Chooser from the Apple
menu. Then, select the icon for your
printer and the port that your
printer is connected to.
2. Select the appropriate
Background Printing radio button
to turn background printing on or
off.
When background printing is on,
you can use your Macintosh while it is preparing a document for
printing. In order to use the EPSON Monitor3 utility to manage print
jobs, background printing must be turned on.
3. Close the Chooser.