Sec.09 - Singer Brilliance 6160 Service Manual

SEC. 09 Feed dog position
(Checking)
Select straight stitch and set stitch length at maximum. Turn hand wheel
toward you to see whether feed dog is not hitting against needle plate at
beginning and end of forward feeding of feed dog. (Clearance between needle
plate and feed dog at front and rear ends must be the same.)
Check to see whether center feed is not hitting against needle plate as well
Beginning of forward feeding
(Adjustment)
Set feed dog at end of forward feeding by turning handwheel .
Loosen screw (2) on feed locker arm (1) at this position.
Then adjust feed dog position with shaft (3) correctly while holding arm(1).
Service Manual
MODEL 6180 / 6160
1
3
End of forward feeding
2
Page
15/27