Advertisement
Quick Links
Advertisement
Related Manuals for TEFAL Access Steam Travel DT7050
Summary of Contents for TEFAL Access Steam Travel DT7050
- Page 1 DT70XX – DUAL VOLTAGE www.tefal.com...
- Page 2 Important safety instructions When using your appliance, basic precautions should always be followed, including the following: • Read all instructions before using this product. • This product has been designed for indoor, domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
- Page 3 the instruction section of this manual. • This appliance was set at the factory to operate at 220- 240 V. Refer to the Operating Instructions section of this manual for conversion to 110-120 V operation. • If using a mains extension lead, ensure that it is correctly rated (16A) with an earth, and is fully extended.
- Page 4 cord loosely around the appliance when storing. • Always disconnect the appliance from the electrical supply when filling with water or emptying when cleaning, when removing or refitting accessories and when not in use. • Care should be taken when using the appliance due to the emission of steam.
- Page 5 knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. • The use of accessory attachments other than those provided by the manufacturer is not recommended and may result in fire, electric shock or personal injury.
- Page 6 220-240 V 110-120 V Depending on model...
-
Page 7: Product Description
PRODUCT DESCRIPTION Voltage selector Removable water tank (110-120V/220-240V) 8. EN Cord exit 2. EN On/Off light indicator Standing base On/Off button 10.* EN Door hook 4. EN Steam head 11.* EN Steam cover Steam trigger 12.* EN Fabric brush 6. EN Water tank locker Depending on model... -
Page 8: Before Use
BEFORE USE 220-240 V 110-120 V Switch the voltage selector in the correct position (110-120V or 220-240V) Press the water tank locker. Remove the water tank. Open the water inlet stopper. - Page 9 150 ml / 150 ml 5 oz Fill the water tank with a maximum of 150 ml of untreated tap water. Close the water inlet stopper. Return the water tank to its place for locking on the appliance. Make sure that the water tank is fully set in place. Hang your garment on a clothes hanger.
- Page 10 ACCESSORIES The door hook allows to hang your garment for steaming. The fabric brush opens the weaves of the fabrics for better steam penetration. Before removing or attaching the steam brush, unplug your appliance and allow it to cool down, for one hour.
- Page 11 220-240 V 110-120 V Switch the voltage selector in the correct position (110-120V or 220-240V) WARNING Never switch the voltage selector while the unit is plug-in. Plug-in the appliance. Switch on the appliance. Wait until the light stops flashing (approximately 45 seconds). When the light is steady the appliance is ready to use.
- Page 12 Press the steam button with the steam brush facing away from you holding it in a vertical position. For optimal use, pass the steam jets over your garment from top to bottom. Warning : Never steam a garment while it is being worn.
-
Page 13: After Use
AFTER USE Press the On/Off button to switch the appliance off. Unplug the appliance. Wait for an hour for your appliance to cool before storing. - Page 14 Press the water tank locker. Remove the water tank. Empty the water tank completely. Return the water tank to its place on the appliance, lock it.
- Page 15 ANTI CALC Do this operation in a vented room. Press the water tank locker. Remove the water tank. Water Water Fill the water tank with 50% water and 50% white vinegar. Do not use other descaling products. White White Vinegar Vinegar Return the water tank to its place on the appliance.
- Page 16 Plug-in the appliance. Switch on the appliance. Wait until the light stops flashing (approximately 45 seconds). When the light is steady the appliance is ready to use.
- Page 17 To release steam, press continuously on the steam button. Allow the appliance to run until the water tank has completely emptied. Press the On/Off button to switch the appliance off. Unplug the appliance and press the water tank locker. Remove the water tank.
- Page 18 150 ml / 150 ml Fill the water tank with a maximum of 5 oz 150 ml of untreated tap water. Return the water tank to its place on the appliance. Make sure the water tank is fully set in place and locked. Plug in the appliance.
- Page 19 Wait until the light stops flashing (approximately 45 seconds). When the light is steady the appliance is ready. To release steam, press continuously on the steam button. Allow the appliance to run until the water tank has completely emptied.
- Page 20 CLEANING Wait an hour for complete cool down. Only use a sponge with water to clean. Never wash or rinse appliance directly over a sink.
-
Page 21: Is There A Problem
IS THERE A PROBLEM ? PROBLEMS POSSIBLE CAUSES SOLUTIONS There is no steam. The appliance is not Check that your appliance is correctly plugged in, or not plugged in and switched on. switched on. The water level is too low. Unplug your appliance and refill it. - Page 24 9100028930-02...