Preparing The Camera - Nikon WP-AA1 User Manual

Waterproof case
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 12

Preparing the Camera

Prepare the camera
Remove the lens protector from the camera. Insert a memory card and fully-charged
battery.
Use a soft cloth or air duster to remove foreign substances such as water or dust
from the camera. If the camera is still wet when inserted into the waterproof case,
this could cause condensation.
1
Open the waterproof case.
Open the buckle (
2
Insert the camera.
Insert the camera into the waterproof case so that the
lens fits in the lens window.
C
Perform following checks before closing the waterproof case.
Quietly close the waterproof case so that the waterproofing packing will not come off.
Be sure the buckle is fully locked.
To prevent the water leakage, check again that the waterproofing packing is not
squeezed-out or that a foreign object is not caught in the waterproof case.
8
1
), then open the rear cover (
2
).

Advertisement

Table of Contents
loading

Table of Contents