Camera Settings - Nikon FSA-L2 Instruction Manual

Camera settings

Compatible cameras: D4 series, D3 series, D2 series, Df, D810 series, D800 series, D750, D700, D610, D600, D300 series, D200,
Jp
En
・ When used with a Nikon FX-format digital SLR camera, vignetting occurs at focal lengths between
De
Fr
Es
Compatible Fieldscopes: EDG Fieldscope 85 VR/85-A VR
It
Ru
Shooting modes:
No
・ Appropriate aperture using aperture-priority auto mode with a film camera has not been verified.
Se
Exposure metering:
・ Matrix metering and spot metering cannot be used.
Fi
・ When you move away from the finder during shooting, prevent light entering with a shield such as an
Nl
Dk
・ Because the optical system has different characteristics from interchangeable camera lenses, when the
Ro
Pl
・ The actual f-number and the focal length vary depending on the actual zoom setting, while the camera
Hu
Cz
Focus:
・ "Autofocus" and "Manual focus with electronic rangefinder" function cannot be used.
・ When a lens is used at a telephoto setting, the viewfinder image becomes darker because of the
Shutter release:
・ When using a tripod, please use a sturdy and stable model.
* Please refer to the Nikon website for the latest information of compatible cameras and Fieldscopes
12
D100, D7200, D7100, D7000, D90, D80, D70 series, D5500, D5300, D5200, D5100, D5000, D3300, D3200,
D3100, D3000, D60, D50, D40 series (As of May, 2015)
500mm and 750mm with EDG Fieldscope 85 series and between 400mm and 600mm with EDG
Fieldscope 65 series.
EDG Fieldscope 85/85-A
EDG Fieldscope 65/65-A
A (Aperture-Priority Auto) mode or M (Manual) mode
Center-weighted metering
eyepiece cap.
FSA-L2 and a Fieldscope are used for shooting with a digital SLR camera, exposure may vary with the
camera model. Use exposure compensation if necessary.
Exposure compensation may be necessary when used at wide-angle zoom setting.
display and image data show the constant f-number (13) and focal length (800mm).
Manual focus using the focusing ring on the Fieldscope body.
changes in F-number. Please take into consideration that in this situation it may be difficult to focus.
To reduce vibration caused by shutter release, please use the following mode/items:
Exposure delay mode, remote cord, self-timer, remote control, Modulite Remote Control Set ML-3, etc.