Basic operation
1
Attach the SB-400 to the camera
En
18
1
Make sure the SB-400 and
the camera body are turned
off.
2
Rotate the mounting foot
lock lever to the left, slide
the SB-400's mounting foot
into the camera's accessory
shoe and turn the lock lever
to the right. (illust. A and B)
• In case the mounting foot lock
lever does not stay to the right
and a red line appears
(illust. C), the mounting foot
lock lever is not fully rotated
to its right position. Re-attach
the SB-400 to the camera
again with the same process
above.