Connecting The Optional Mc-Dc2; Mounting The Gp-1A On The Camera - Nikon GP-1A User Manual

Connecting the Optional MC-DC2

Connecting the Optional MC-DC2
An optional MC-DC2 remote cord for remote shutter re-
lease can be connected to the GP-1A accessory terminal
( ). When connecting the MC-DC2, be sure the con-
nector is in the correct orientation; do not use force.
D D Disconnecting the GP-1A Disconnecting the GP-1A
Turn the camera off , disconnect the cable, and then re-
place the ten-pin terminal cap or close the accessory
terminal cover.

Mounting the GP-1A on the Camera

Mounting the GP-1A on the Camera
The Camera Accessory Shoe The Camera Accessory Shoe
The GP-1A is equipped with a mount (
camera accessory shoe. Slide the GP-1A onto the cam-
era accessory shoe as shown.
Page 1 of 2 Page 1 of 2
En
) that fi ts the
9