Hill Start Assist - PEUGEOT BOXER 2018 Handbook

Reactivation
F Press this button again.
The system is active again; this is confirmed
by the button indicator lamp going out and the
display of a message.
Malfunction
In the event of a fault with the system, the
Stop & Start system is deactivated and this
warning lamp comes on, accompanied by
a message in the instrument panel screen.
Have it checked by a PEUGEOT dealer or by
a qualified workshop.
In the event of a malfunction in STOP mode, it
is possible to restart the engine by depressing
the clutch pedal fully or by putting the gear
lever into neutral.
Maintenance
Before doing anything under the bonnet,
deactivate the Stop & Start system to
avoid any risk of injury resulting from an
automatic change to START mode.
This system requires a specific battery
with a special specification and technology
(reference numbers available from a PEUGEOT
dealer or a qualified workshop).
Fitting a battery not approved by PEUGEOT
introduces the risk of malfunction of the
system.
For more information on the Battery, refer to
the corresponding section.
The Stop & Start system makes use of
an advanced technology. All work on
this type of battery must be carried out
only by a PEUGEOT dealer or a qualified
workshop.

Hill start assist

System which keeps your vehicle stationary
for a short time (approximately 2 seconds)
when starting on a gradient, the time it takes
to move your foot from the brake pedal to the
accelerator pedal.
This system (also called HHC – Hill Holder
Control), integrated with the dynamic stability
control system, is activated in the following
conditions:
- the vehicle must be stationary, engine
running, foot on the brake,
- the gradient of the road must be steeper
than 5%,
- uphill, the gearbox must be in neutral or in
a gear other than reverse,
- downhill, reverse gear must be engaged.
The hill start assist system is a driving
aid. It is not an automatic vehicle parking
function or an automatic parking brake.
Driving
6
95