Spare Wheel - PEUGEOT BOXER 2018 Handbook

Spare wheel

Parking
F Park the vehicle where it does not block
traffic: the ground must be level, stable and
non-slippery.
F If the road is sloping or damaged, place an
object under the wheels to act as a chock.
F With a manual gearbox, engage first gear
then switch off the ignition to block the
wheels.
F Apply the parking brake and check that the
warning lamp is on in the instrument panel.
F The passengers must get out of the vehicle
and wait where they are safe.
F Put on the high visibility vest and signal that
the vehicle is immobile by using the devices
envisaged by the legislation in force in the
country where you are driving (warning
triangle, hazard warning lamps, etc.).
F Equip yourself with the tools.
Special feature with pneumatic
suspension
If the vehicle is fitted with this system, you must
activate vehicle lifting mode before lifting the
vehicle with a jack.
For vehicles with the steering wheel on the
right, the buttons are located on the right of the
steering wheel.
F With the ignition on, simultaneously press
buttons 1 and 2 for at least 5 seconds.
Their indicator lamps come on fixed.
F To leave this mode, simultaneously press
buttons 1 and 2 for another 5 seconds.
Their indicator lamps go off and the system
becomes fully operational again.
This mode deactivates itself automatically if the
speed of about 3 mph (5 km/h) is exceeded.
Once your vehicle is properly secured, you
should proceed in this order:
1- Take the tools.
2- Remove the spare wheel from its
compartment.
3- Position the jack.
4- Change the wheel to be repaired.
5- Put away the wheel to be repaired.
In the event of a breakdown
1 - Take the tools
These are stowed in a box located under the
front passenger seat.
F Turn the button a quarter of a turn then pull
the box.
F After use, press the button then turn it
a quarter of a turn to secure the box.
8
137