Table of Contents

Advertisement

Bonnet

Opening
Before doing anything under the bonnet,
deactivate the Stop & Start system to
avoid the risk of injury related to an
automatic change to START mode.
Inside
This operation must only be carried out with the
vehicle stationary and the driver's door open.
F Pull towards you the release lever located
on the side of the dashboard.
Outside
F Push up the safety catch located above the
grille and raise the bonnet.
Do not open the bonnet in very windy
conditions.
When the engine is hot, handle the safety
catch and stay with care (risk of burns).
Practical information
F Unclip the stay and tilt it to insert it in the
first notch, then the second.
Because of the presence of electrical
equipment under the bonnet, it is
recommended that exposure to water
(rain, washing, etc.) be limited.
Closing the bonnet
F Before closing the bonnet, put the stay back
in its housing.
F Lower the bonnet and release it at the end
of its travel. Check that the bonnet is locked.
7
125

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents