Pneumatic suspension
If your vehicle is fitted with pneumatic
suspension, you can adjust the height of
the rear of the vehicle to make loading and
unloading easier.
There is a nominal level as well as 6 height
adjustment levels, raising (from +1 to +3) or
lowering (from -1 to -3). The levels are indicated
in the instrument panel screen.
Manual adjustment of the
loading height
Raise: upwards adjustment of the
load floor
F Make a quick press on the
control to select the next level
up. Each press (LED on) raises
the floor by one level: +1 to +3.
A long press selects the highest level (+3).
Lower: downwards adjustment of
the load floor
F Make a quick press on the
control to select the next level
down.
Each press (LED on) lowers the floor by one
level: -1 to -3.
A long press selects the lowest level (-3).
Return to the nominal floor
height
F Press the same number of times in reverse
as the level of the position displayed.
Deactivation
F Hold both controls down simultaneously to
deactivate the system. The LEDs remain on.
Reactivation
F Holding both controls down simultaneously
a second time reactivates the system. The
LEDs go out.
Above 3 mph (5 km/h), the system
reactivates automatically.
Automatic loading height
correction
Above 12 mph (20 km/h), the system
automatically returns the rear floor height to its
nominal value.
Driving
6
113