Load Paper; Install Software - Epson Stylus C66 Start Here Manual

5

Load Paper

1
Fan a few sheets of paper and place them against the right edge
guide. Make sure the paper is under the tabs on the edge guides.
2
Press in the side of the left edge guide and slide it against the paper,
but not too tightly.
Don't load paper
above this arrow
6

Install Software

Follow the steps in this section to install the software for your operating
system.
Windows XP
1
Make sure your printer is connected to your computer and turned on.
Then turn on your computer.
2
Wait for Windows to detect your printer and display a screen like this:
DON'T CLICK ANY BUTTONS ON THIS SCREEN.
Note: If a screen like this doesn't appear, make sure your printer
is turned on and connected.
3
Put the Epson CD in your CD-ROM or DVD drive and wait a few
seconds for the CD to be recognized.
Your printer software installs automatically and various messages
appear on the screen.
4
When installation halts, click Finish.
5
You see the license agreement. Read the agreement and click Agree.
You see the Options Menu. Continue with the instructions in
"Finishing Software Installation" on the back of this sheet to
complete the software installation.