Connect The Printer - Epson Stylus C66 Start Here Manual

Epson stylus c66: quick start
Hide thumbs Also See for Stylus C66:
Table of Contents

Advertisement

continued
4
Lower each ink cartridge into its holder with the green circuit board
facing the front.
Then gently push each ink cartridge down until it is firmly seated.
The color of the cartridge label should match the marker on the
holder.
5
Close the cartridge cover.
6
Close the printer cover and press the
The green
for several seconds.
Caution: Don't turn off the printer while the green
is flashing, unless the printer hasn't moved or made noise for
more than 5 minutes.
4

Connect the Printer

1
Make sure your computer is turned off. Keep it turned off until
section 6, "Install Software."
2
Plug the
on your computer.
3
Plug the
on your printer.
power light flashes as your printer charges ink
flat end of the cable into any available USB port
square end of the cable into the USB port
ink button.
power light

Advertisement

Table of Contents
loading

Table of Contents