Epson Stylus C66 Start Here Manual page 7

Epson stylus c66: quick start
Hide thumbs Also See for Stylus C66:
Table of Contents

Advertisement

6
Click CD-ROM drive. Make sure Floppy disk drive and Specify a
location are not checked, then click Next.
7
At the next screen, click Next. Installation proceeds automatically.
8
When installation halts, click Finish.
9
You see the license agreement. Read the agreement and click Agree.
You see the Options Menu. Continue with the instructions in
"Finishing Software Installation" to complete the software installation.
Finishing Software Installation
1
Make sure you have paper loaded in the printer. Then click Print a
Test Page to check that your printer is set up correctly.
2
Click Install Epson Software Film Factory and follow the instructions
on the screen.
Note: If you see a message about installing QuickTime,
follow the instructions on the screen. You don't need a registration
number.
3
Click Install Epson Printer Information Center to install it on
your desktop.
Note: You need a browser—such as Microsoft
or later or Netscape Navigator
4
Click Add Epson Photo Website Links and follow the instructions
on the screen.
5
When you're finished, click Back to return to the Options Menu.
6
Click Install Epson Web-To-Page and follow the instructions
on the screen.
7
When you're finished, click Exit to close the Options Menu.
8
When you see the Epson Product Registration screen, register your
printer as instructed, then remove the Epson CD.
You're ready to print! See your Quick Guide for details.
Problems?
If your problem is listed here, try these suggestions. For more information,
see your software Help, your Quick Guide, or your on-screen Epson Printer
Information Center.
You don't see the Found
(or Add) New Hardware
Wizard screen when
installing the printer
software.
The red
paper light is
on (nothing prints).
Paper jams frequently.
®
4.0 or later—to view the guide.
Make sure your printer is on and the USB
cable is securely connected to your printer's
USB port. If you still don't see the screen,
try connecting your printer to a different
USB port on your computer.
If paper is out, load more paper and press
the
paper button to resume printing.
If paper is jammed, press the
to eject it.
If the paper doesn't eject, turn off the printer,
open the cover, and pull the paper out from
the front. Then reload paper, turn the printer
on, and press the
Use new, smooth, high-quality paper. Don't
load paper above the arrow mark inside the
left edge guide. Place paper behind the tabs.
Slide the left edge guide against the paper,
but not too tightly.
®
click Yes and
®
Internet Explorer 4.0
paper button
paper button.

Advertisement

Table of Contents
loading

Table of Contents