Westinghouse WVE606 User Manual page 9

Shelves and trays
IMPORTANT
The shelves are designed so that they have maximum
travel but cannot be accidentally pulled right out. The
trays are designed the same way and fit straight into the
side racks.
To fit a shelf or tray to side racks:
• Locate the rear edge of the shelf/tray in between
2 guide rails of the side rack - see diagram. Ensure
the same rail positions on both sides of the oven are
being engaged.
• With the front edge raised, begin to slide the shelf
into the oven.
• Once the detents have passed the front edge of the
side rack, the shelf can be pushed completely in.
• The grill/baking tray for separate grill wall oven
models slides into the wire runners in a similar
manner.
• When fully inserted the shelf/tray should not interfere
with the closed oven door.
• Remove extra trays and dishes before roasting
or baking.
To fit a shelf or tray to telescopic slides (where fitted):
• With the slides fully pushed in, push the shelf or tray
along the top of the slide until it hits the back post.
• Drop the front of the shelf or tray onto the slide
ensuring it sits behind the front post of the slide.
• When fully inserted the shelf/tray should not interfere
with the closed oven door.
INSTALLING OVEN ACCESSORIES
Back post
Front post
9