Disposal after washing
Cleaning the lint filter
On Models HWM130-M186,HWM150-M186
The lint filter should always be used during washing and should be cleaned after
each use in a timely fashion.
1.To remove the lint filter, first press the elastic
piece at the upper end of the filter to release
the tab from the filter cover, then pull outward.
2.Pull the lower end of the lint filter rear cover
outward to separate it from the
lint filter front cover. Remove lint completely
by rinsing with clear water.
3.Re-install the lint filter.
lint filter rear cover
14
Install
Dismantle
Lint filter front cover