Haier HWM105-M186 Owner's Manual page 13

Washing sequence
Mid-wash spin cycle
1. Put the laundries into the spin tub evenly and smoothly.
2.Spin:
a.Distribute the laundry into the spin tub smoothly and evenly.
Note: the gland must be inserted properly even if the laundry quantity is small.
Push
Proper
b.Close both the inner and outer covers of the spin tub.
c.Spin for 1-2 minutes.
3.Run the foam-removing spinning.
a.Open the outer cover of the spin tub.
b.Set the water-filling selector control rod at
the "SPIN" side. Fill water for about 1 minute.
If the water quantity filled is too large,the
water may flow out from the wash tub side.
Please twist the water tap to limit the water
filling.
c.Close the outer cover of the spin tub.
Spin for 1-2 minutes.
Gland
The laundry
is slanted.
Outer cover of
the spin tub
Inner cover of
the spin tub
11
Push
Proper No gland
TOR