Advertisement
Quick Links
Specification table
Water level/Water
1/23L 2/32L 3/40L 4/49L 5/58L 6/66L 7/76L 8/86L
quantity (about)
Water Injection pressure
0.03MPa
Washing / spinning capacity
-
1.0MPa
10.0kg/10.0kg
This manual is for
HWM100-828A
WARRANTY:
Two years free for motor
One year free for other parts
Please read this manual
carefully before using.
0030508582A
Retain it for future reference.
Advertisement
Related Manuals for Haier HWM100-828A
Summary of Contents for Haier HWM100-828A
-
Page 1: Specification Table
(about) Water Injection pressure 0.03MPa 1.0MPa Washing / spinning capacity 10.0kg/10.0kg This manual is for HWM100-828A WARRANTY: Please read this manual Two years free for motor carefully before using. One year free for other parts 0030508582A Retain it for future reference. -
Page 2: Table Of Contents
CONTENTS Packing list Names of the parts Safety precautions Installation and adjustment Inside the document bag Install the water inlet hose Components of the water inlet Preparation before washing hose Put in the laundries Inside the accessory bag Usage of the detergent Close the top lid Bottom plate Use the operation button... -
Page 3: Names Of The Parts
Names of the parts Trouble-shooting answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. Do not repair it by yourself. Phenomena The reason How to settle... -
Page 4: Safety Precautions
Safety precautions Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. The washing machine must be positioned so that Otherwise it may influence your using the machine. Please plug the power plug on special the plug is accessible. - Page 5 Safety precautions The washing machine has a Wool program , intended for high-grade fabrics such as cashmere . First, make sure the laundry can be washed with water or not. If not, do not use the washing machine to wash the laundry. If yes, select the washing cycle Do not put hand into the rotating tub.
-
Page 6: Installation And Adjustment
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. I "DELAY " button It is very important to your security and correct operating the machine. Press the "DELAY" button, digital display the time of washing appointment (by the hour display), LED starts blinking. - Page 7 Adjust the Installation position "WASH " button Press the Wash button to select a wash time, from the MEMORY,BLANKET, CHILD ,SPEEDY STANDARD WASH The largest allowable slope of the shank base of the machine is 2 .The slanting or rough ground will result in programs.
-
Page 8: How To Change The Direction Of The Drain Hose
5 Use the operation button How to change the direction of the drain hose Description of operation button POWER ON/OFF REMAIN(MINUTES) STANDARD FIRST RINSE COMMON Lean the machine down gently with the front 4.Put your hand into the machine and loosen the BLANKET SECOND RINSE MEMORY... -
Page 9: Install The Water Inlet Hose
2 Put in the laundries Install the water inlet hose Confirm the water faucet The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one Water faucet,suitable time. -
Page 10: Preparation Before Washing
1 Preparation before washing Connection between the water inlet hose and the washer Preparation before washing 1.Connect the water inlet hose. 1.Do not take off the water absorption cushion. Please check if the 2.Confirm that the washing machine is earthed nut of the water cushion is dropped or damaged before each usage.