Technical Data - Husqvarna 125B Operator's Manual

To clean the air filter
1. Remove the air filter cover and remove the air
filter.
Engine Specifications
Cylinder displacement
Electrode gap
Fuel tank volume
Idle speed
Maximum power speed
Power output
Spark plug
Maximum speed blow mode
Maximum speed vaccum mode
Emission durability period
Noise and Vibration Data
Equivalent vibration level at handles with blower
tubes and nozzle (original)- see note 1
Equivalent vibration level at handles with vaccum
tubes (original), left/right - see note 1
Equivalent sound pressure level at the operators'
ear measured according to ISO 22868 equipped
with blower tubes and nozzle (original) - see note
3
Sound pressure at the bystander's ear measured
according to ANSI B175.2 equipped with blower
tubes and nozzle (original)
14
2. Clean the air filter with warm soap water. Make
sure that the air filter is dry before you install it.
3. Replace the air filter if it is too dirty to fully clean
it. Always replace a damaged air filter.
4. If your product has a foam air filter, apply air filter
oil. Only apply air filter oil to a foam filter. Do not
apply oil to a felt filter.

Technical data

unit
(125B28HV)
3
cm 28
mm 0.6
3
cm 500
-1
min 2800 - 3200
-1
min 8000
kW 0.8
Champion
RCJ-6Y
-1
min 8600
-1
min --
h 125
2
m/s 11.03
2
m/s --/--
dB(A) 96
dB(A) 71
125B 125BX
(125B28HV)
28
0.6
500
2800 - 3200
8000
0.8
Champion
RCJ-6Y
8600
7500
125
11.03
12.16/12.29
96
71
214 - 008 - 23.09.2021
125BVX
(125B28HV)
28
0.6
500
2800 - 3200
8000
0.8
Champion
RCJ-6Y
8600
7500
125
11.03
12.16/12.29
96
71