Extend Your Wired Network By Plug & Play - TP-Link TL-PA7010P User Manual

Chapter 2
2 2 Extend Your Wired Network by Plug & Play
I want to:
How can I
do that?
Done!
Use two powerline adapters to set up a new powerline network
in my house.
For example, I have a router in my house, but there are not enough
LAN ports for all my wired devices. I don't want complex and
expensive cabling. People told me that I can solve this problem
with two powerline adapters.
1 Connect one of the powerline adapters to an available LAN
port of the router using an Ethernet cable.
2 Plug the powerline adapter into a wall outlet.
3 Plug the other powerline adapter into a wall outlet on the
same electrical circuit at the place you want internet. Wait
until the powerline LED
Note: If the Powerilne LED is red or off, refer to
Powerline LED is red or off?
4 Connect your wired device, such as a computer or game
console, to the powerline adapter via an Ethernet cable.
e
r l i n
w e
P o
1
N
L A
Router
N
W A
Now enjoy the internet!
Use Your Powerline Adapter
turns on.
for detailed information.
Adapter
TL-PA7010P
ps
Mb
10 00
2
Adapter
TL-PA7010P
Q2. What should I do if the
Wait until the Powerline
LED turns on.
ps
Mb
10 00
3
7