Add Another Powerline Adapter - TP-Link TL-PA7010P User Manual

Chapter 2
2 4

Add Another Powerline Adapter

I want to:
How can I
do that?
Add a new powerline adapter into the existing powerline network
to extend my network.
For example, I've already set up a powerline network using
powerline devices, but the network does not reach everywhere I
need it to. I purchased another one to further extend my network.
1 Plug the new powerline adapter into a wall outlet near one of
the existing powerline devices.
ps
Mb
10 00
2 Wait for a minute, and check whether the Powerline LED
turns on. If it's on, skip to step 3. If it's not, continue with
step 2 to pair the new powerline adapter into the secured
powerline network.
a . Press the Pair button on one of the existing powerline
devices for 1 second. Its Power LED
b . Within two minutes, press the Pair button on the new
powerline adapter for 1 second. Its Power LED
blinking. When the Powerline LED
process is complete.
Existing
1 0 0
0 M
b p s
Powerline Device
3 Relocate the new powerline adapter to the place where wired
internet access is needed.
Use Your Powerline Adapter
e
r l i n
w e
P o
Mb ps
10 00
Blinking
within 2 minutes
New
Powerline Device
10 00
Mb
ps
starts blinking.
starts
turns on, the pairing
On
Blinking
1 0 0
0 M
b p s
9