Extend Your Wired Network By Plug & Play - TP-Link TL-PA7027P User Manual

Chapter 2
2 2 Extend Your Wired Network by Plug & Play
I want to:
Use two powerline adapters to set up a new powerline network in my house.
For example,a wall in my house is thick enough to influence the signals, but I want to
bring internet to the room upstairs, to basement, garage, or the far corner of my house.
I don't want complex and expensive cabling. People told me that I can solve these
problems with two powerline adapters.
How can I do that?
1 Connect one of the powerline adapters to an available LAN port of the router using
an Ethernet cable.
2 Plug the powerline adapter into a wall outlet.
3 Plug the other powerline adapter into a wall outlet on the same electrical circuit at
the place you want internet. Wait until the powerline LED
Note: If the Powerline LED does not turn on, refer to
4 Connect your wired device, such as a computer or game console, to the powerline
adapter via an Ethernet cable.
Router
Done!
Now enjoy the internet!
FAQ-Q2
i r c
l C
i c a
c t r
E l e
m e
S a
Adapter
2
TL-PA7027P
1
N
L A
N
W A
Use Your Powerline Adapter
turns on.
for instructions.
i c
c t r
E l e
m e
S a
u i t
Adapter
TL-PA7027P
3
8