Add Another Powerline Adapter - TP-Link TPL-PA4020P User Manual

Chapter 2
2 4

Add Another Powerline Adapter

I want to:
Add a new powerline adapter into the existing powerline network to extend my network.
For example, I've already set up a powerline network using powerline devices, but the
network does not reach everywhere I need it to. I purchased another one to further
extend my network.
How can I do that?
1. Plug the new powerline adapter into a wall outlet near one of the existing powerline
devices.
2. Wait for a minute, and check whether the Powerline LED
to step 3. If it's not, continue with step 2 to pair the new powerline adapter into the
secured powerline network.
a . Press the Pair button on one of the existing powerline devices for 1 second. Its
Power LED
b . Within 2 minutes, press the Pair button on the new powerline adapter for 1
second. Its Power LED
the pairing process is complete.
Existing
Powerline Device
3. Relocate the new powerline adapter to the place where wired internet access is
needed.
A
16
AX
W ,M
80
36
M AX
starts blinking.
starts blinking. When the Powerline LED
Blinking
within 2 minutes
A V
6 0
0
Use Your Powerline Adapter
e
r l i n
w e
P o
M AX
36
80
W ,M
AX
16 A
A X
W ,M
80
X 36
M A
A
16
W ,M AX
80
36
M AX
turns on. If it's on, skip
A V
6 0
0
New
Powerline Device
16
A
A V
6 0
0
turns on,
A V
6 0
0
Blinking
On
9