List Of Models; Symbols; Warnings - Graco Falcon Instructions-Parts List Manual

Airless Package
Package
Part No. Series Pump Model
15D077 A Falcon 20:1
stand
Warning Symbol
WARNING
This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
INSTRUCTIONS
D This equipment is for professional use only.
D Read all instruction manuals, tags, and labels before operating the equipment.
D Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco
distributor.
D Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
D Check equipment daily. Repair or replace worn or damaged parts immediately.
D Do not exceed the maximum working pressure of the lowest rated system component. Refer to the
Technical Data on page 28 for the maximum working pressure of this equipment.
D Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech-
nical Data section of all equipment manuals. Read the fluid and solvent manufacturer's warnings.
D Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose
Graco hoses to temperatures above 180_F (82_C) or below 0_F (–18_C).
D Do not kink or over bend hoses or use hoses to pull equipment.
D Wear hearing protection when operating this equipment.
D Do not lift pressurized equipment.
D Comply with all applicable local, state, and national fire, electrical, and safety regulations.
D Keep hands and clothing away from any moving parts.

List of Models

Maximum Fluid
Working Pressure
2000 psi (13.7 MPa, 137 bar)

Symbols

Caution Symbol
This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.
WARNING
Maximum Air
Input Pressure
100 psi (0.7 MPa, 6.9 bar)
CAUTION
Gun Ball/
Seat Material
carbide
308994 3