Samsung SMT-1734 User Manual page 11

USER'S MANUAL USER'S MANUAL USER'S MANUAL
In VGA/HDMI Mode, "Sharpness" can not be adjusted.
Screen
Image Lock , PC Position , Image Reset
•
Image Lock(Coarse and Fine Tuning of the Image)
The purpose of picture quality adjustment is to
remove or reduce picture noise.
If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible
(coarse) and Fine-tune again.
After the noise has been reduced, re-adjust the
picture so that it is aligned on the center of screen.
Screen
Image Lock
PC Position
Image Reset
Move
Image Lock
Coarse
Fine
Move
1. Preset: Press the SOURCE button to select VGA
mode.
2. Press the MENU button to select the Picture menu.
3. Press the ENTER or
4. Press the / and ENTER button to select the
Screen menu.
5. Press the / to select "Image Lock",then press the
ENTER button.
6. Press the / button to select "Coarse" or "Fine",
then press the ENTER button.
7. Press the / button to adjust the screen quality.
Press the ENTER button.
8. Press the MENU button to exit.
Enter Return
50
63
Enter Return
button.
•
PC Position
Adjust the PC's screen positioning if it does not fi t the
Monitor screen.
Move
1. Follow the "Image Lock" instructions number 2 to 4.
2. Press the / button to select "PC Position",
then press the ENTER button.
3. Press the / button to adjust the Vertical-Position.
Press the / button to adjust the Horizontal-Position.
Press the ENTER button.
4. Press the MENU button to exit.
•
Image Reset (Initializing the Image Settings)
You can replace all image settings with the factory
default values.
Image Lock
PC Position
Image Reset
Move
1. Follow the "Image Lock" instructions number 2 to 4.
2. Press the / button to select "Image Reset",then
press the ENTER button.
3. Press the MENU button to exit.
Only in VGA Mode, "Screen" can be adjusted.
- 11 -
PC Position
Enter Return
Screen
Enter Return