Cut-Sheet Feeder
Paper handling
Pull the left and right rear tabs on the cut-sheet feeder forward
1.
until the paper guides retract and lock open to allow for paper
loading.
Slide the left paper guide to where the fin on the edge guide
2.
aligns with the arrow on the front panel. Next, slide the right
Take a stack of paper and fan it. Tap the side and bottom of
3.
the paper on a flat surface to even up the stack.
CAUTION:
or labels in the cut-sheet feeder.
Using the Printer Options
4-4
Do not use multi-part forms, carbon paper,