Dip Switch Functions - Epson ActionPrinter 2000 User Manual

Table 2 International character set and PC selection

DIP switch functions

This section describes the different features you can control with
the printer's DIP switches.
Character spacing
DIP switch 1-1 controls the character spacing. If this switch is off,
the printer prints with character spacing of 10 cpi (characters per
inch); if it is on, the printer prints with character spacing of 12 cpi.
Shape of zero
When DIP switch 1-2 is on, the printer prints slashed zeros (0);
when off, the printer prints open zeros
Page length
DIP switches 1-3 and 1-4 control the page length. You can select a
page length of 216 mm (8.5 inches), 279 mm (11 inches), 296 mm
(11.7 inches), or 305 mm (12 inches).
i s
T h i s 1 0 c p i
A B C D E F G H I J K L a b c d e f g h i j k l
This is 12 cpi printing.
ABCDEFGHIJKL&cdefghijkl
Setting the DIP Switches
p r i n t i n g .
(0).
Using the Printer 3-7