the Power Saving Mode
Adjusting
In compliance with the Energy Star program, the printer enters
power saving mode when it is idle for a specified length of time
(15 minutes by default). While in this mode, the printer
conserves energy by using less electricity.
Power saving mode is automatically interrupted whenever you
send a print job or press the reset button at the back of the
printer. It takes approximately 45 seconds for the printer to
warm up when it is in power saving mode.
You can specify how long the printer is idle before power
saving mode comes on or turn off power saving mode. For
more information, see Chapter 2.
1-12
Using Your Printer