Epson ActionLaser 1400 Reference Manual page 87

Warning:
Avoid touching the electrical components that are exposed after you
remove the metal access cover. They may be very hot if the printer
has been used recently.
4.
Press the SIMM firmly in one of the slots until it snaps into place.
5. If you have a second SIMM, press it into the remaining slot.
6.
Replace the metal access
7.
Reattach the power cord.
8.
Switch on the printer's power.
9.
Now you need to update the printer driver's Memory setting. Bring
up a software program that you often use to print.
10. From the File menu, choose Print or Page Setup.
11. Choose the Setup button. (Depend) on your software, you might
to choose Options or Printer.)
need
If prompted to select a printer, select ActIonLaser 1400.
12.
13. When the Paper Setup dialog box appears, change the Memory
setting for the amount of memory now installed in the printer. (Be
sure to include the 2MB already installed.)
Choose OK to close dialog boxes. When you return to the Print dialog
14.
box, Cancel.
choose
cover.
Installing Additional Memory
D-3