Status; Wireless Setup - ActionTec WEB7200 User Manual

WEB7200 WiFi 6 Repeater
1. Ensure that the Extender is connected to an Actiontec gateway/modem, and that both devices are
powered on.
2. On a computer connected to the same network as the gateway/modem and Extender, log in to the
gateway/modem's GUI. Find the list of devices that are connected to your gateway/modem.
3. Find the Extender by its MAC ID from the list of connected devices or status screen. The MAC ID of the
Extender is provided on a sticker located on the rear panel of the Extender, as shown below.
4. Write down the IP address of the Extender.
5. Enter the IP address written down in step 4 in the address box of the web browser.
6. The Extender's Status screen appears. Enter the Extender's Username and Password (found on the
label located on the back panel of the Extender; see second figure, below), in the User Name and
Password text boxes in the upper right corner of the Status screen. The Extender's GUI's Status screen
appears.

Status

The first GUI screen that appears is the Status screen, which can also be generated by clicking the Status
icon in the menu bar. This screen contains basic information about the Extender's wireless status,
network stations, and product information about the Extender. There are no configurable settings
available in this screen.
Wireless Setup
Clicking the Wireless Setup icon from the menu bar of any of the Extender's GUI screens generates the
Wireless Network List screen. Additional wireless settings can be accessed from the menu on the left
side. These settings configure various aspects of the Extender's wireless network, and the majority of
them should be adjusted by an experienced network technician only. The exceptions are the settings
contained in the Basic Setup screen.
Wireless Network List
Selecting Wireless Network List generates the Wireless Network List screen (above). This screen displays
various characteristics of the Extender's wireless networks.
Basic Setup
The Basic Setup wireless network screen contains various settings regarding the Extender's wireless
network. When finished adjusting the settings in this screen, click Apply.
Multiple SSID
This option allows the user to setup different SSIDs (wireless networks) with different parameters. Select
the option desired from the Multiple SSID drop-down menu.
Wireless Radio
This option turns the Extender's wireless radio on and off.
Company Confidential. 6