Page 1: Table Of Contents
Basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and personal injury, including the following: 18 Contact Information 21 Actiontec Electronics, Inc 3301 Olcott St, Santa Clara, CA 95054, United States Tel: (408) 752-7700 Company Confidential.
Page 2: Introduction
WEB7200 WiFi 6 Repeater Introduction The Actiontec WEB7200 is a wireless network extender with dual concurrent radios supporting both 2.4GHz and 5GHz operation in 802.11ax. This allows the Extender to connect to everything from legacy wireless laptops, computers, and gaming platforms, up to the most current (and future) Apple and Android tablets, laptops, media platforms, and smartphones.
Page 3: Features
WEB7200 WiFi 6 Repeater Features • Fast 802.11ax Wi-Fi wherever you need it • Upgrade to 802.11ax speeds without replacing your router • Dual band concurrent radio for wireless throughput up to 2Gbps • 2x2 802.11ax 5 GHz radio • 2x2 802.11ax 2.4 GHz radio •...
Page 4: Back Panel
The WEB7200 can’t communicate with the Internet. Back Panel • Power port: used to connect the power adapter (external, 12V DC, 2A, made by Actiontec, model #CDS024T-W120U) to the Extender. • Reset button: restores the Extender back to the original factory default settings when held down for at least 10 seconds.
Page 5: Installing The Extender
WEB7200 WiFi 6 Repeater Installing the Extender There are two parts to installing an Extender: syncing the Wi-Fi settings, and placing and connecting the Extender. Syncing Wi-Fi To sync the Extender with the gateway/modem's Wi-Fi settings: 1. Place the Extender next to the gateway/modem.
Page 6: Status
WEB7200 WiFi 6 Repeater 1. Ensure that the Extender is connected to an Actiontec gateway/modem, and that both devices are powered on. 2. On a computer connected to the same network as the gateway/modem and Extender, log in to the gateway/modem's GUI.
Page 7: Advanced Setup
WEB7200 WiFi 6 Repeater SSID Broadcast This option controls whether or not the name of the network is broadcast to other wireless devices (usually, in the device’s available wireless network list). Select Enable or Disable by clicking in the appropriate radio button.
Page 8: Specifications
Check URL text box, then click Apply. Firmware Upgrade Actiontec periodically posts firmware upgrades that may include enhancements and/ or bug fixes for the Extender. To upgrade the Extender's firmware: 1. Go to http:/ /www.actiontec.com/ support/ to discover the latest firmware available for the Extender.
Page 9: Notices
WEB7200 WiFi 6 Repeater Power Adapter Input 90-240VAC@ 0.5A Output 12Vdc@ 2A Made by Actiontec, model # CDS024T-W120U Regulatory FCC 15B, 15C, ISE Canada ICES UL, K.21 Wi-Fi, WPS RoHS Environmental Operating temperature - 0°C to 40°C (32°F to 104°F) Storage temperature - 0°c to 70°C (32°F to 158°F)
Page 10 • Consult the dealer or an experience radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Actiontec Electronics, Inc., may void the user's authority to operate the equipment. Declaration of Conformity...
Page 11: Contact Information
WEB7200 WiFi 6 Repeater Important Note on Wi-Fi If applicable, this equipment complies with FCC/Industry Canada radiation exposure limits set forth for an uncontrolled environment. The radio has been found to be compliant to the requirements set forth in CPR 47 Sections 2.1091, 15.247 (b) (4),15.407 addressing RF Exposure from radio frequency devices as defined in Evaluating...