18
|
Electrical installation
18 Electrical installation
In this chapter
18.1 About connecting the electrical wiring
18.1.1 Precautions when connecting the electrical wiring
Installer and user reference guide
66
NOTICE
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
18.1
About connecting the electrical wiring ..................................................................................................................................
18.1.1
Precautions when connecting the electrical wiring ..............................................................................................
18.1.2
Guidelines when connecting the electrical wiring ................................................................................................
18.1.3
Specifications of standard wiring components .....................................................................................................
18.2
To connect the electrical wiring to the indoor unit ...............................................................................................................
18.3
To connect appropriate measures for appliances filled with CO₂.........................................................................................
Typical workflow
Connecting the electrical wiring typically consists of the following stages:
1
Making sure the power supply system complies with the electrical
specifications of the units.
2
Connecting the electrical wiring to the outdoor unit.
3
Connecting the electrical wiring to the indoor unit.
4
Connecting the main power supply.
DANGER: RISK OF ELECTROCUTION
WARNING
ALWAYS use multicore cable for power supply cables.
INFORMATION
Also read the precautions and requirements in the
precautions" [
4
INFORMATION
Also read
"18.1.3 Specifications of standard wiring
WARNING
▪
All wiring MUST be performed by an authorised electrician and MUST comply
with the applicable legislation.
▪
Make electrical connections to the fixed wiring.
▪
All components procured on-site and all electrical construction MUST comply
with the applicable legislation.
5].
"2 General safety
4
components" [
68].
FXFN50~112A2VEB
CO₂ Conveni-Pack: indoor unit
4P677925-1 – 2021.07
66
66
67
68
69
71