Table of Contents
Advertisement
Cautions for Safety
Do not install in a place with possible leak of
flammable gas.
Leaked flammable gas around the
refrigeration unit may catch fire from a
spark of a switch and lead to fire.
Apply a drain work according to the need.
Without consideration of drain water
processing, moisture from rainwater and
defrosted water generates mold and moss,
and may cause slipping on the floor.
Install in a place without air stagnation.
Leak of refrigerant gas may cause
insufficient oxygen and harm human health.
Install in a place with good ventilation.
Always install a ground fault interrupter with the
specified capacity.
Incorrect capacity does not operate safety
stop function and may lead to fire or
electrical shock.
Caution
Installation Work
Produce a refrigeration cycle within the limits of
an operation standard (refer to "Scope of
Application").
Apply heat insulation on the suction line and liquid
line.
Request a specialty operator for moving
the refrigeration unit.
Electrical Work
Do not include electrical wiring in the heat
insulation material.
Be sure to comply with the following
Non-standard refrigeration cycle may
generate abnormal high pressure and
abnormal heat generation, thereby causing
burst, smoke generation, fire and current
leak.
Lack of heat insulation generates water
from condensation and mold and moss,
thus causing slipping on the floor.
Incorrect moving may cause falling or
dropping of the refrigeration unit, and
cause injury.
Refrigeration unit is a heavy item.
Always consult with a specialty operator.
Condensation of piping may cause current
leak and fire caused by overheating.
5
Advertisement
Table of Contents
