Replacing Ink Cartridges - Epson Stylus CX6000 Series Quick Manual

You can purchase genuine Epson ink and paper from an Epson authorized reseller.
To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can
purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian
sales).
Use these part numbers when you order or purchase new ink cartridges:
Color
Black
Cyan
Magenta
Yellow
Caution:
Leave the expended cartridge installed until you have obtained a replacement, or the ink
remaining in the print head nozzles may dry out.

Replacing Ink Cartridges

Make sure you have a new ink cartridge before you begin. Once you start replacing
a cartridge, you must complete all the steps in one session.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
1. Make sure the Epson Stylus CX6000 Series all-in-one is on.
2. Make sure that the document cover is closed, then open the scanner.
Caution:
Do not open the scanner when the document cover is open.
3. Check the photo viewer screen to determine which cartridge needs to be
replaced. Then do one of the following:
■
If the ink cartridge is expended, press the x
■
If the cartridge is low on ink or you are replacing an old cartridge, press
the
Setup/Utilities
to change cartridges
Part number
69
68 (High Capacity)
69
69
69
button. Press the l or r button to select
. Then press the x
T code number
T069120
T068120 (High Capacity)
T069220
T069320
T069420
button.
Start
button.
Start
Replacing Ink Cartridges
Press Start
37