Copying A Photo - Epson Stylus CX6000 Series Quick Manual

Copying a Photo

1. Make sure the Epson Stylus CX6000 Series all-in-
one is turned on.
2. Place a photo on the glass as described on page 7, or place multiple photos as
described on page 8. Be sure to close the document cover.
3. Load up to 20 sheets of letter-size, 4 × 6-inch, or 5 × 7-inch photo or matte
paper (see page 5 if you need instructions).
4. Press the
5. Press the l or r button to select
to automatically restore the colors in faded photos
as you copy. If your photos are not faded, select
Restoration Off
6. Press the x
your photos on the photo viewer screen.
7. Press the l or r button to view your photos.
8. Press the u or d button to select the number of copies you want of each
photo.
9. Press the paper type button to select
borderless photos (without a white border). Select
your photos printed with an .06-inch border.
10. Press the paper size button to select
be automatically sized to fit on the size of paper you select.
11. Press the x
a moment the CX6000 Series starts printing.
If you need to stop copying, press the y
out paper that is being printed; it will be ejected automatically to the output tray.
Note:
The copies may not be exactly the same size as the original.
10
Copying a Photo or Document
button.
Photo
.
button to scan and preview
Start
button to print your photos. The
Start
Restoration On
Photo Paper
, , or
4"x6" 5"x7"
Stop/Clear Settings
or to print
Matte Paper
if you want
Plain Paper
. Your photo will
Letter
light flashes and after
On
button. Do not pull
Photo
button