Selecting Photos From The Screen - Epson Stylus CX6000 Series Quick Manual

When you want to remove the card, make sure the memory card access light is not
flashing, then pull the card straight out of its slot.
Caution:
Do not remove the card or turn off the CX6000 Series while the memory card access
light is flashing; you may lose data on the card.

Selecting Photos From the Screen

You can view the photos on your memory card on the photo viewer screen and
select them for printing.
1. Make sure your Epson Stylus CX6000 Series all-in-one is not connected to
your computer (or your computer is turned off ).
2. Load up to 100 sheets of plain paper or up to 20 sheets of photo or matte
paper at a time (see page 5). You can load more paper later as necessary to
print all your selected photos.
3. Insert the memory card (see page 14).
4. Press the C
Memory Card
Select Photos
5. Press the l or r button to view the first photos
you want to print.
6. Press the u or d button to select the number of
prints you want.
7. Continue pressing the l or r button to view other
photos you want to print and press the u or d
button to select the number of prints you want of each photo.
8. Select
Photo Paper
Note:
If you select Plain
Paper or Matte Paper, your photos print borderless, to the edge of the paper.
9. Select ,
Letter
10. Press the x
Start
Note:
If you need to stop printing, press the y Stop/Clear Settings button.
button until the
light comes on.
,
Matte Paper
Paper, your photos print with a white border. If you select Photo
, or for the paper size.
4"x6" 5"x7"
button to start printing.
, or (whichever you loaded).
Plain Paper
Selecting Photos From the Screen
Memory
Card
button
15