Panasonic KX-TGH262C Operating Instructions Manual page 24

Making/Answering Calls
Panasonic Ni-MH battery
performance (supplied batteries)
during power back-up mode
When the batteries are fully charged,
operating time of the handset in power
back-up mode varies depending on usage.
– Continuous use of the handset in power
back-up mode: 1.5 hours max.
– Continuous use of the handset other than a
handset in power back-up mode: 2 hours
max.
– Not in use in power back-up mode: 2 hours
max.
Making calls during a power
failure
n When only 1 handset is registered:
1
Lift the handset and dial the phone
number.
2
Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
3
When the other party answers the call,
keep the handset on the base unit and
talk using the speakerphone.
4
When you finish talking, press MOFFN.
n When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls.
Note:
R The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
Making a call using the redial list
n When only 1 handset is registered:
1
Lift the handset.
2
MEN REDIAL
3
MbN: Select the desired entry.
24
TGH26xC(en)_1224_ver013.pdf
n When 2 or more handsets are registered:
Making a call using the phonebook
There must be at least 2 handsets
registered to the base unit in order for the
phonebook feature to be used during a
power failure.
You should leave one handset on the base
unit for supplying the power, and use another
handset for making calls.
Answering calls during a power
failure
n When only 1 handset is registered:
n When 2 or more handsets are registered:
Note:
R The range of the base unit is limited during
24
4
Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls.
1
When the unit rings, keep the handset
on the base unit and press M
MZN.
R Speakerphone is turned on.
2
When you finish talking, press MOFFN.
When the unit rings, use a handset which is
not supplying power to the base unit.
R Do not use or lift the handset which is
placed on the base unit during power
back-up mode.
a power failure. Please use the handset
close to the base unit.
2013/12/24 14:29:39
N or