Intercom; Power Back-Up Operation For Landline - Panasonic KX-TGH262C Operating Instructions Manual

2
MbN: "Hold" a MSELECTN
3
To answer the 2nd call:
Press MCELLN while the 2nd call is being
received.
4
To hang up the 2nd call and return to the
1st call (landline call), press MOFFN, then
press M N.
Answering a 2nd call during a cellular
call
1
Press MMENUN during a cellular call.
2
MbN: "Hold" a MSELECTN
3
To answer the 2nd call:
Press M N or MCELLN while the 2nd call
is being received.
4
To hang up the 2nd call and return to the
1st call (cellular call), press MOFFN, then
press MCELLN *1 .
*1 If you press MCELLN and the selection list
is displayed, select the desired cellular
line and press MSELECTN.

Intercom

Intercom calls can be made between
handsets.
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, the interrupt tone sounds
(page 34).
To answer the call with the handset, press
MOFFN, then press the corresponding line
key.
Making an intercom call
1
MMENUN (right soft key) a
MSELECTN
2
MbN: Select the desired unit. a MSELECTN
3
When you finish talking, press MOFFN.
TGH26xC(en)_1224_ver013.pdf
Note:
R You can also use the MINTERCOMN soft
Answering an intercom call
1
2
Using the Smart function key
Press M
Power back-up operation
for landline
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power back-up mode). This allows
you to make and receive landline calls using a
handset during a power failure. The base unit
will not perform any other functions. However,
some functions such as Call Display and
phonebook are available only when using a
handset other than the handset supplying
power to the base unit. You can program
"Power failure" and the default setting is
"Auto" (page 36).
Important:
R If a handset is not placed on the base unit
R Power back-up mode will not work if the
R Do not lift the power supplying handset
a
23
Making/Answering Calls
key, if displayed, to make intercom calls.
Press M N to answer the page.
When you finish talking, press MOFFN.
N to answer the page.
when a power failure occurs, "Base no
power Press OFF" is displayed. After
pressing MOFFN on the handset, place it on
the base unit to start power back-up mode.
battery level of the power supplying
handset is or .
from the base unit during power back-up
mode.
2013/12/24 14:29:38
23