Advertisement
INSTALLATION, COMMISSIONING
Rinnai continuous flow Solar models S26i, S28i and S32 are specifically designed for installation
as gas boosters in Rinnai Solar Hot Water Systems. They are not suitable for use in any other
applications.
IMPORTANT
The Installation, Commissioning, Maintenance and Service information for Rinnai Solar hot water systems and
components including the gas booster is detailed in the following Rinnai publications:
•
Operation / Installation Manual Rinnai Split Solar Hot Water Systems
•
Operation / Installation Manual Rinnai Close Coupled Solar Hot Water Systems
•
Operation / Installation Manual Rinnai Evacuated Tube Split Solar Hot Water Systems
These publications are supplied separately with your solar hot water system and should have been handed to the
end user by the system Installer. If a copy of either of these publications is required please contact Rinnai.
Solar models S26i, S28i and S32 are factory pre-set and sealed to a delivery temperature of 70°C to meet regulator
requirements. This setting cannot be altered. Local regulations and/or the requirements of AS/NZS 3500 must
be considered regarding the temperature limitations to areas primarily used for personal hygiene. Temperature
limiting devices may be required. Refer to the above-mentioned Rinnai publications for more information.
A pouch behind the front cover of continuous flow models contains gas pressure setting and diagnostics information
and a wiring diagram these appliances. This information must be read in conjunction with the relevant solar system
Operation / Installation manual. This gas pressure setting and diagnostics information is usually not required
during installation.
Installation, Commissioning, Maintenance and Service by an Authorised person only. DO NOT
attempt to install any solar hot water system components (including the gas booster) without
first studying the relevant Rinnai publications.
IMPORTANT
S28i (REU-VCM2837FF) (70) has an integrated control module. This control module includes
UP / DOWN buttons, ON / OFF button, Priority Button and LED Digital Display. Solar models are
pre-set and sealed to a delivery temperature of 70°C. The water temperature cannot be adjusted
IMPORTANT
using UP / DOWN Buttons.
OTHER ACCESSORIES
Use of a Recess Box permits the recessed installation of a Rinnai S32 gas booster into a wall cavity, while saving
precious space they are also suitable for painting. Available in either plastic (Smart Box) or metal.
Conceal the pipes and valves of the Rinnai S32 gas booster with easily attached Pipe Covers. These pipe covers
may also be joined to one another to conceal longer pipe work runs.
Protect the Rinnai S32 gas booster from theft and damage with a Security Cage.
Secure the Rinnai S26i, S28i and S32 gas booster from theft with a custom designed Security Bracket.
Pre-heat your hot water to reduce hot water delivery times and water wastage with a Smartstart pre-heat system.
Contact Rinnai for more information about our accessory range and model suitability, or visit: www.rinnai.com.au.
Rinnai
6
HW_CF_SOLAR OIM
Advertisement
