Gas Burners; Advance Cleaning Of Burner Cup And Cap; Igniting The Gas Burners - Siemens HX9S7RI40N Instruction Manual

Table of Contents

Advertisement

ÄGas burners
T his chapter explains how to set a hotplate. The table
G a s b u r n e r s
shows heat settings and cooking times for various
meals.

Advance cleaning of burner cup and cap

Clean the burner cap (1) and cup (2) with water and
washing-up liquid. Dry the individual parts carefully.
Place the burner cup and cap back on the burner shell
(5). Ensure that the igniter (3) and flame safety pin (4)
are not damaged.
The nozzle (6) must be dry and clean. Always position
the burner cap exactly over the burner cup.

Igniting the gas burners

Always position the burner lid precisely on the burner
cup. The openings in the burner cup must remain
unobstructed at all times. All parts must be dry.
Open the top cooker cover. The top cover must
1.
remain open for as long as the hob is in operation.
Turn the knob for the required burner anti-clockwise
2.
to the ignition position
starts.
Press and hold the burner knob for 1-3 seconds.
3.
Gas begins to flow out and the gas burner ignites.
The flame failure device is activated. If the gas flame
goes out, the gas supply is automatically shut off by
the flame failure device.
Set the desired flame size. Between the
4.
position and the
˜
position, the flame is not stable.
Therefore, always choose a position between the
large flame and
small flame.
Check whether the flame is lit. If it is not, repeat the
5.
process from step 2.
To end the cooking process, turn the hotplate
6.
control clockwise to the
The hotplate control should not be actuated for longer
than 15 seconds. If the burner does not ignite within 15
seconds, wait at least 1 minute before repeating the
procedure.
:
Warning – Caution!
If, after switching the cooker off, you turn the burner
knob while the cooker is still hot, gas will escape. If you
do not turn the burner knob to the
within 60 seconds, the gas supply is shut off.
The gas burner does not ignite
If there is a power cut or if the ignition plugs are damp,
you can light the gas burners with a gas lighter or a
match.

Gas burners

. The ignition process
Off
û
Off position.
û
ignition position
en
˜
19

Advertisement

Table of Contents
loading

Table of Contents