Akai AK-10KGTLW Instruction Manual page 18

Instructions (Cont.)
Preset timer (delayed washing)
This washing machine has a 0
determine the time when the washing program will finish. (It is, in effect, similar to a
'delayed start' function, but you set the time period after which you want the wash to
finish rather than to start.)
NOTES: * The Preset function is not available for the Delicate program.
* To avoid water leakage when using this function, make sure the water taps
are open, the drain hose is properly installed and the washing load and
detergent are properly prepared.
1. Put your washing in the machine, loading items uniformly in the tub.
2. Press the Power button.
3. Select the required Program and process, and any other Water Level, Temperature
and Ultrasonic, if required.
4. Press the Preset button to select the desired time period (in hours) for the wash to
finish.
5. Select the water level, if necessary.
6. Add any detergents (see below and page 15 for details).
7. Close the washer lid and press the Start/Pause button.
8. After setting the Preset, the corresponding light will illuminate and all other lights
will be switched off about one minute later. (If you set the child lock, the Child
Lock light will be on.)
9. To check the preset program, press any button (except for the Power button); the
program will be indicated for 5 seconds. During these 5 seconds you can press the
Water Level button and set the water level.
10. To cancel the preset, shut off the power.
11. To change the preset time, first cancel the preset, then set it again.
Adding detergent to a preset wash
When using the delayed wash, we recommend
you use powder detergent. Do not add detergent
directly to the wash tub ahead of the wash time,
but follow the instructions below:
• Washing detergent: either put detergent into
the detergent box or, if you prefer to put it
directly into the wash tub, wrap the powder in a
small cloth.
• Fabric softener: dilute the softener with twice
the amount of water, then pour the solution into the softener dispenser.
18
24 hour preset function, which you can set to
–
(AU) 1300 886 649 (NZ) 0800 836 761 |
After Sales Support
info@tempo.org